Description

Description

Engineer Plus Advance Flex is two component cementitious coating system for waterproofing of wet areas and any water retaining structures such as swimming pools and water features.

Typical Applications

• Any concrete, cement of masonry surface that are subject to moisture ingress.
• Swimming pools, water features and water tanks.
• Bathrooms, toilets, balconies, planters etc.

Features

• Seamless, impervious membrane.
• Elastomeric. High film build-up.
• Excellent adhesion to concrete and masonry substrates.
• Low VOC
• Easily applied by brush, roller or trowel.
• can be applied on damp surface.

Method of Application

     1. Surface preparation

• The substrate must be sound, clean and free from dirt, oil and loose material.
• Masonry surfaces should be fully cured (minimum 28 days) prior to application.
• All surface cracks, undulations and voids must be repaired before application using a suitable Engineer Plus repair material.
• Substrates must be surface dry prior to application.

     2. Mixing

• Using a slow speed mechanical mixer and a clean suitable mixing vessel, slowly add the powder component to the liquid polymer and stir until a smooth and homogenous slurry, is achieved.
• Allow the mixed slurry to stand for 5-10 minutes before use.
• Do not dilute with water.

     3. Application

• Apply Engineer Plus Advance Flex lurry by brush, roller or trowel.
• Allow the first coat to dry completely for 6-8 hours before applying the second coat.
• Apply second coat at right angles to the first coat

 Coverage

• 1.25 ltrs/mm/sq.mt per coat (DFT 1 mm).