SEAL HOME
WATER PROOF COMPOUND
Seal Home is a boon for modern living. It is an amazing, powerful chemical to stop water leakage & dampness from cement concrete structures like terraces, water tanks, kitchens, bathrooms, sidewalls, swimming pools, safety tanks, bridges, dams, cannals etc. It is easy to handle eco-friendly, water thinnable, stable on dilution, economical, ready to use anywhere anytime. 
For Perfect Plastering
For perfect and lifetime plastering on old or new concrete or bricks work give a direct coat of Seal Home by brush or spray without water on the surface and immediately spread washed & dried fine sand on the coated surface. The screeded surface can be plastered any time. Do not hatch concrete surface for plastering work or add to new concrete which badly effect strength of concrete due to hammering and develops hair cracks throughout the structure of building.Multiple Advantages
- Fast drying, excellent adhesion to most building materials & no need to cure.
- Increase in bonding of new wet concrete to old concrete.
- Increase in durability & toughness of concrete.
- Increase flexural and bond strength of concrete.
- Forms a very tough bond with substrate having good permeability rating.
- Excellent elastomeric and crack bridging capability.
- Good weathering characteristics.
- Very low water absorption, withstanding hydrostatic pressure.
- Not susceptible to alkali degradation.
- Resistance to high alkali, sulfates, and salts.
- Good color retention and low dirt pick-up.
- Breathable coating, allows vapor transmission.
- Repairs asbestos roofs, gutters, drain pipes, and tile joints.
How to Use
- Clean the external surface from oil, dust, fungus, grass roots, rust & loose material using a wire brush, shot blasting, and finally vacuum cleaning for best results.
- Fill up gaps & cracks in the surface with a mixture of cement or mortar mix and 25% Seal Home in water.
- Wash the surface with SAC or clean water using a cloth or sponge and let it dry fully.
- Stir well and mix one part of Seal Home with one part of clean water.
- Apply the solution using a painting brush, roller, or spray on the clean, washed, and dried surface.
- After 40 minutes of the first coat, apply a second coat of Seal Home.
- If required, apply a third coat after another 40 minutes.
- After application, Seal Home dries within 10 minutes on the applied surface & within 6 to 8 hours the surface becomes fully waterproof and usable.
- Don’t keep the container open; replace the cap immediately after use.
- Wash the brush immediately after use.
Properties of Dried Film
- High mechanical strength
- High resistance to alkali
- High impact resistance
- High scrub resistance
- High resistance to ultra violet light
- High heat stability (Between 0°C to 90°C)
- High resistance to water
- High freeze-thaw stability
Location
-
Sadee World Pvt Ltd.
61 Jawahar Marg, Udhyog Parisar, 1st Floor , Sanjay Setu Sqaure, Indore 452007 (M.P.), INDIA - 0731-4979467
- +91 9229182999
- 9826011056
- sadeeworld99@gmail.com
- sadeeworldsales@gmail.com,