Heat + Water Proofing


1) WAC-99: A highly concentrated latex emulsion for waterproofing applications as well as protective coating to cementations substances. WAC-99 is mixed with water & cement in 1:1:2.5 by wt. It is highly economical comparatively to any such product available in the market.

(2) QCS-99: Ready to use. Seal immediately on contact with water. Effective crack sealing in concrete & masonry surfaces. Can stop the leaking dripping water, until the final repairs
are carried out. Hardens instantly under continuous wet conditions.

(3) Fiber mash : To strengthen & for reinforcement purpose. It is highly resistant to weather and sunlight. It is an elastomeric mash ,forms a very tough bond with subtract having good permeability rating. Resistant to high alkali, mild acids, sulphates salts, carbon dioxide.

(4) Leakprime-99 : Aquaprime – 99 TM plays major role in facade coating system . It forms a dry water repellent zone beneath the coating consolidate the substrate and enhance bonding of the coating . It is gas permeable, durable, protects paints & plasters against harmful influences form within the masonry .

(5) Leaksil-99 : Drastic Reduction in masonry maintenance cost with long term improved resistance to vagaries of weather. Protects Building , saves energy, keeps Substrate dry reducing the thermal conductivity. A water dilutable solution designed to impart repellency to masonry surface.

(6) PSS-99: Forms a tough elastic rubber like seal. Accommodates continuous and pronounced cycle movement. High resistance to aging influences, physical damage and climate extremes. Good adhesion to most buildings materials. Resistant to temperature UV rays, ozone and weather conditions. Has a movement capability of +25% width joints.

(7)HPC-99: It is a matchless heat proof compound which wonderfully works on masonry surface. It stops heat penetration and keeps cool by reflecting more than 90% heat of the sun from surface. It makes you comfortable to walk on, to live with and to save electric energy. It keeps water cool in any

(8) TR.WPC-99: A boon for modern living. An amazing, powerful chemical to stop water leakage and dampness from cement concrete structure. High resistance to water, High mechanical strength, High scrub and impact resistance.

(A) Waterproofing Procedure with fiber mesh (9 layer):

  •   Clean the surface by rubbing with wire brush to remove dust and other particles.
  •  Wash with clean water.
  •  Apply 1st coating of Engineer plus leaksil99, leakprime99 & water.
  •  Apply 2nd &3rd coating of Engineer plus WAC-99 & Engineer plus ICS-99, cement with Fiber mash.
  •  Apply 4th & 5th coating of Engineer plus WAC-99 & Engineer Plus ICS-99with cement (Highly crack resistant coating).
  •  Apply 6th &7th coat of HPC-99 layer for Heat proofing & mix with water in the ratio of 1 : 0.5 kg.
  •  Then apply 8th coat of Pure HPC-99 layer for giving Final touch of Heat proofing, as required
  •  Then apply final 9th coat of TR.WPC—99 protective layer for 100% Heat Proofing.

(B) Waterproofing Procedure on Sidewall :

  • Clean the surface by rubbing with wire brush to remove dust, and other.
  • Wash with clean water
  • Apply 1st coating of Engineer plus Aquasil99, Aquaprime99 & water.
  • Apply 2nd &3rd coating of Engineer plus WAC-99 & Engineer plus ICS-99, white powder.
  • Apply final 4th Coat with Engineer Plus WPC-99, & Engineer Plus Aquasil-99.

(C)Waterproofing Procedure on Paraffit wall :

  • Clean the surface by rubbing with wire brush to remove dust, and other.
  • Wash with clean water
  • Apply 2 coating of WAC-99 & ICS-99 with Mog-99/ cement. ( Highly crack resistant coating ). After application of WAC-99 & ICS-99 with cement 3 days curing with water required , done by you.
  • Then apply final 2 coat of WPC—99 & ICS-99 protective layer for 100% waterproofing.

Rate : Rs. 70 per sq ft. Depends upon the condition of the terrace. ( Eligible rate is 10 Rs per coat )
(Rates are inclusive of Chemicals, mechanical tools & Supervision etc…Cement will be provided by you.)

Need Help ?