Sadee World Pvt. Ltd.
61 Jawahar Marg, Udhyog Parisar, 1st Floor, Sanjay Setu Sqaure, Indore 452007 (M.P.), INDIA
Ready to use extra quick setting/plugging compound. Emergency crack sealing in concrete & masonry surfaces. Can stop the leaking dripping water, until the final repairs are carried out Hardens instantly under continuous wet conditions. Single component. Low heat eveluation minimizes cracking.
How to use
Cut the location / hole to a V-groove shape. Mix ICS-99, Water & cement thoroughly in 1:1:2 ration by weight at the time of application. Within 10 seconds instantly push the semipaste material inside the prepared groove and keep pressure of trowel/ palm on it for about 5 minutes.
Area of Application
Basements, Pits, Dams, Cellars, Tunnels (dusts), Concrete pipe, water rataining structures, RCC water tank. Suitable for old surface, new surface, repairs and normal applications in concrete & masonry works.
An unmatched the ultimate admixture for cement concrete specially developed for fast hydration of cement with water ratio at given workability by increasing compressive strength at all ages without affecting the long term mechanical properties of concrete.
In cement concrete phenomenon of FSP-99 is observed as under:
- Even with 20% less water ensures homogeneous and consistant mortar mix with not risk of segregation.
- Due to fast wetting of cement lumps are formed and the cohesive mix insures compact mass formation thereby increasing strength of the concrete up to 20%.
- Increase workability and finish without raising cement water ratio. Reduces, cracks and shrinkage in cement concrete
- Early extra strength.
- It allows fast removal of form work due to early gain of strength with high mechanical properties
Doses:
(a) 200 gms. of FSP-99 is suffcient for 50 kg. of Portland cement which requires 8 days curing only and produces very dense water impermeable concrete.
(b) using 500 gms. of FSP-99 per 50kg. of Portland cement no curing is required, produces dense and water impermeable concrete within 8 days, resumes workable strength in 72 hours.
A Poly Carboxylic Based
An unmatched the ultimate admixture for cement concrete. Specially developed for delaying hydration of cement with reduced cement water ratio at a given workability by increasing compressive strangth at all ages without affecting the long term mechanical properties of cement.
In cement concrete phenomenon of SPC-99 is observed as under:
- 1) Faciliate transportation of readymix concrete (RMC) over long distances even in hot climates without loss of strength.
- 2) Mass concrete and high reinforcement concrete structures where construction joints have to be avoided.
- 3) Cementation of oil wells, ready mix oil well cement.
- 4) High quality concrete pours which demand good workability throughout placement in large section.
- 5) Hot weather concreting with long and difficult pours.
- 6) Produces extremely workable, high strength, pumpable water tight dense concrete.
- 7) Produces durable, crack resistance, frost resistance deicing salt resistance concrete.
Super Plasticizer for Concrete with built-in Biocytes. Used in Concrete construction for improvement in workability & water reduction. To reduce the water/cemnet ration in order to improve hardened concrete properties. It also acts as a water reducing and retarding admixture at higher dosages. It disperses intantly in the gauging water and forms a film on the cement particles. It is highly effective set retarder.
ADVANTAGES
- Improved workability. Improves compressive strength. Saving in cement. Liquid admixture ensures homogeneous mixing.
- Reduces water/cement ratio.
- Low dosage thus economical.
- Ratards concrete setting. More time is available between
- continuous pours. Avoids cold joints. Lowers rebound losses.
- Prevents shrinkage cracks.
- Versatile product, multiple uses.
- Improves adhesion and durability of the plaster.
Non shrink Grout Additive for Cement is powder admixture, which after mix with cement, cement-sand, mortar or concrete ingredients flowable grout at low water cement ratio for high interfacial contact and shrinkage compensation by exanding during initial setting of the mix.
Advantages:
Produces free flowing expansive grouting slurry even at low w/c for shrinkage compensation and retention of the filled volume. Effective on cement, cement-sand, mortar and concrete ingredients. Effective for achieving high early strength. Easy to mix, economical, non corrosive, non toxic.
How to Use:
NSGA-99 is fine gray powder which is mixed with dry ingredients say cement/cement-sand/cement-sand-aggregates in dry form mechanically. After dry mixing all the ingredient as above mix NSGA-99 thoroughly @ 1kg per 50 kg bag of cement. After dry mixing add water as per the doses recommended.
CCA-99 is a white pigmented emulsion of synthetic resin & wax in viscus condition. After application on green concrete a film is forme with good solar reflectance, reduces surface temperature and prevents the premature water loos by evaporation. It allows full hydration of cement essential for optimum strength developments
Method of Application:
to the freshly placed concrete after finishing apply evenly CCA 99 by painting brush or by spatula. About 1mm. thick layer is suffcient for getting desired results. While applying with brush make it brushable with 10% clean water. While application the surface must be free from oil, greases etc. For horizontal surface on-exposed slabs it should be applied as soon as the initial sheen disappear from the surface or the surface is free from excess visible water. On vertical & formed surface apply it after dampening down the concrete with clean water. The film dries with in 2 hours, but shall not subjected to rain water or otherwise before 12 hours of application.
