e-Brochure
BDP Guide

Epoxy

Pattern Bg

WHY CHOOSE EPOXY/PU FLOOR ?

There are many reasons why to choose Epoxy Floor over any other floor covering. Since it is possible to provide the epoxy resin systems of specific characteristics, epoxy floors can be made to satisfy the users' demands. It is a very great advantage to have floors produced of unchangeable physical, technical and chemical characteristics. Advantages of using epoxy floor are that they protect concrete from wear, chemical corrosion & deterioration. Reduce wear to transport vehicles and time spent on maintenance. Provide faster material movement through working & transport areas. Reduce floor maintenance and cleaning costs, producing a cleaner work environment and decrease injuries with non-slip surfaces. Increase light reflectivity and brighten work areas.

FOR COMMERCIAL SPACES

  • Automotive/Engineering Industries
  • Pharmaceutical / Food & Beverage Industries
  • Chemical & Fertilizer Plants
  • Electrical & Electronic Industries
  • Hospitals/O.T. & Laboratories
  • Showrooms & Workshops
  • Hotels
About Us

Two component polymer modified cementitious flexible membrane system for waterproofing application as well as protective coating to cementitious substances.

Application procedure:

Surface for treatments must be thoroughly cleaned of all laitance, loose materials, oils, greases etc. Mix one part of Resin (White Liquid) with 2 part of Gray powder by weight. Pre wet the surface before application. Apply 1" coat allow it to dry for 60 minutes apply second coat and allow it to dry. If required apply 3" coat. Cure the screed/mortar for minimum 3 days.

Area of application:

Bridges, Decks, Parking areas in highways, Reinforcement steel to prevent corrosion, stepping terraces and flats roofs. Repairs of worn, damaged & spoiled concrete. For injection, pressure & precision grouting. Kitchen, bathrooms, side walls, swimming pools, safety Tanks etc.

A two pack epoxy primer, Recommended as a priming coat for concrete and steel structurals of bridges fertilizers, chemical, power plants, hospital etc, due to excellent mechanical, waterproofing, thermal, electrical corrosion resistance and adhesive properties.

SURFACE PREPARATION:
  • Clean the surface for oil, laitance and loose particles. See the surface is fully dried.
  • The surface should be clean and dry before application.
  • Before application insure that the new concrete is cured minimum for 90 days.

APPLICATION:
  • Stir the base thoroughly and then mix three parts of base and one part of catalyst to uniform
  • consistency. Allow the mixture to mature of 25 minutes and stir well before and during application
  • Brush: Apply without thinning.
  • Conventional Spray: Add upto 10% Thinner and use standard equipment at a pressure 3.5-4.9 kg./cm.

A two pack epoxy coating system with excellent results in industrial highly corrosive environments. Recommended for use on MS & concrete areas of fertilizer plants, chemical units, refineries, petrochemicals, hospitals etc.

SURFACE PREPARATION:
  • Clean the surface for oil, laitance and loose particles. See the surface is fully dried.
  • The surface should be clean and dry before application.
  • Before application insure that the new concrete is cured minimum for 90 days.

APPLICATION:
  • Stir the base thoroughly and then mix three parts of base and one part of catalyst to uniform
  • consistency. Allow the mixture to mature of 25 minutes and stir well before and during application
  • Brush: Apply without thinning.
  • Conventional Spray: Add upto 10% Thinner and use standard equipment at a pressure 3.5-4.9 kg./cm.

It is a two component solvent free self leveling wear resistant high viscus, epoxy compound.

ADVANTAGE:

Excellent resistance to chemical & high abrasion. It is wear resistant and water impermeable. The flooring compound is capable of withstanding high loading with excellent scretch resistance. Easily applied as a universal screed in all industries with a coloured overcoating of epoxy/polyurethane based coatings. Has excellent abrasion and chemical resistance, with a medium resistance for impact at higher thickness of application. Can also be used for small repairs to concrete industrial floors. Seamless, dust free, hygienic and non-slip surface. High early strength, hence floor can be used quickly. Can be used in preparation of perimeter edge coving upto a height of 225mm.

HOW TO USE:

Clean the surface for oil, laitance and loose particles. See the surface is fully dried. Prime the surface with ECP-99. mix the two component as per the ration prescribed. Let is stand for 10 minutes before application.

APPLICATION:

In chemical and engineering industries, refineries, paint shops, battery rooms, internal loading and unloading bays and ramps. As a protective coating for steel & concrete structures in various industries. Can be applied on walls/ceilings.

A two component clear epoxy priming system cured with polyamide provide very though prime coat for subsequent epoxy coating suitable for protection of steel structure in aggressive coastal and industrial atmosphere.
The product has good water, solvent and chemical resistance. The product is specially developed for direct application on steel and concrete surfaces for subsequent epoxy coatings.

SURFACE PREPARATION STEEL:

Remove oil, grease and other contaminants by using degreasing solvent and blast to sa 21/½ (Swedish Standard SIS 05 5900) with a surface profile up to 65 microns maximum.

CONCRETE:

Before application insure that the new concrete is cured for 90 days. Clean the surface for oil, laitance and other contaminants and salt deposits by high pressure water hosing and rough it up manually by wire brush to adhesive prime system firmly. Before application insure all dust other particles are fully removed by sunction or air blast and the surface is fully cleaned and dry.

A three component Epoxy Resin based self leveling floor topping heavy duty and chemical Resistant. The cured mass provides a hard, tough and abrasion resistant surface with excellent adhesion to cementitius surface. The surface is readily cleaned and is hygienic

Uses:

Recommended for diverse industrial & domestic application & specially used as anti corrosive, chemical resistant, hygienic & anti fungus. Having excellent mechanical, waterproofing, thermal and electrical, industrial & sanitation properties on MS and Concrete areas of fertilizer plants chemical units, refineries, petrochemical, Auto Industries, hospital, kitchens and stores.

SURFACE PREPARATION AND USE:
  • Clean the surface for oil, laitance and loose particles. See The surface is fully dried. The surface should be clean and dry before application. Before application ensure that the new concrete is cured minimum for 90 days.
  • Apply clean primer (ECP-99) on the clean surface and let It dry for 24 hours.
  • Stir 2 parts of A with 3 parts of C till uniform consistency is obtained than add one part of B(Hardner) to the uniform mix slowly. apply within 15 minutes
  • Apply top coat: : EPW-99 after 72 hours.

Shadecard

© All Rights Reserved by Sadee World Pvt. Ltd. | Waterproofing & paints